Please use this identifier to cite or link to this item:
|Title:||Validation of Calculated Self-Shielding Factors for Rh Foils|
|Authors:||JACIMOVIC R.; TRKOV Andrej; ZEROVNIK G.; SNOJ L.; SCHILLEBEECKX Peter|
|Citation:||NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION A-ACCELERATORS SPECTROMETERS DETECTORS AND ASSOCIATED EQUIPMENT vol. 622 no. 2 p. 399-402|
|Publisher:||ELSEVIER SCIENCE BV|
|Type:||Articles in periodicals and books|
|Abstract:||Rhodium foils of about 5 mm diameter were obtained from IRMM. One foil had thickness of 0.006 mm and three were 0.112 mm thick. They were irradiated in the pneumatic transfer system and in the carousel facility of the TRIGA reactor at the Jo¿ef Stefan Institute. The foils were irradiated bare and enclosed in small cadmium boxes (about 2 g weight) of 1 mm thickness to minimise the perturbation of the local neutron flux. They were co-irradiated with 5 mm diameter and 0.2 mm thick Al-Au(0.1%) alloy monitor foils. The resonance self-shielding corrections for the 0.006 mm and 0.112 mm thick samples were calculated by Monte Carlo simulation and amount to about 10 % and 60 %, respectively. The consistency of the measurements confirmed the validity of the self-shielding factors. Trial estimates of the Q0 and k0 factors for the 555.8 keV gamma line of 104Rh were made and amount to 6.65±0.18 and (6.61±0.12) × 10 2, respectively. The quoted uncertainty is the spread from the mean of two measurements, and not the true uncertainty.|
|JRC Institute:||Institute for Reference Materials and Measurements|
Files in This Item:
There are no files associated with this item.
Items in repository are protected by copyright, with all rights reserved, unless otherwise indicated.