Title: CERTIFICATION REPORT The certification of the mass concentration of immunoglobulin G proteinase 3 anti-neutrophil cytoplasmic autoantibodies (IgG PR3 ANCA) in human serum: ERM® - DA483/IFCC
Authors: MONOGIOUDI EVANTHIAHUTU DANA PETRONELACHAROUD-GOT JEANSHELDON JOANNASCHIMMEL HEINZTRAPMANN STEFANIEMERONI PIERLUIGIEMONS HENDRIKZEGERS INGRID
Publisher: Publications Office of the European Union
Publication Year: 2017
JRC N°: JRC106170
ISBN: 978-92-79-66974-3
ISSN: 1831-9424
Other Identifiers: EUR 28537 EN
OP KJ-NA-28537-EN-N
URI: http://publications.jrc.ec.europa.eu/repository/handle/JRC106170
DOI: 10.2760/373057
Type: EUR - Scientific and Technical Research Reports
Abstract: This report describes the production and certification of ERM-DA483/IFCC, a serum protein reference material intended for the standardisation of measurements of immunoglobulin G proteinase 3 anti-neutrophil cytoplasmic autoantibodies (IgG PR3 ANCA). The material was produced according to ISO Guide 34:2009 [ ] and is certified in accordance with ISO Guide 35:2006. The raw material used to prepare ERM-DA483/IFCC was a plasmapheresis material containing a high concentration of IgG PR3 ANCA. After a prior commutability study lyophilised serum was selected as the best format for the reference material. The processing of the serum was based on the procedure used for the reference material ERM-DA470k/IFCC [3]. The plasma was converted into serum which was then delipidated. After the addition of preservatives the processed serum was diluted with plasmapheresis buffer containing albumin, prior to the transfer of 1 mL aliquots to glass vials. The serum was then lyophilised and the vials were closed with rubber stoppers and screw caps under argon atmosphere prior to storage at -70 °C. The between unit-homogeneity was quantified and stability during dispatch and storage was assessed in accordance with ISO Guide 35:2006. The material was characterised by an inter-laboratory comparison exercise performed by laboratories of demonstrated competence, using a purified IgG PR3 ANCA preparation as calibrant. This was achieved by applying a value transfer protocol previously used in the characterisation of ERM-DA470k/IFCC. Technically invalid results were removed, but no outliers were eliminated on statistical grounds alone. The uncertainty of the certified value was estimated in accordance to the Guide to the Expression of Uncertainty in Measurement (GUM) and included components relating to possible lack of homogeneity, stability and the property value measured during characterisation. The main purpose of this material is to be used for the calibration of immunoassay-based in vitro diagnostic devices or control products for IgG PR3 ANCA measurements. As any reference material, it can also be used for control charts or validation studies. The CRM is available in glass vials containing approximately 0.1 g of dried powder. The minimum sample intake to be used after reconstitution of the material is 5 μL. The CRM was accepted as European Reference Material (ERM®) after peer evaluation by the partners of the European Reference Materials consortium.
JRC Directorate:Health, Consumers and Reference Materials

Files in This Item:
File Description SizeFormat 
kjna28537enn.pdf801.27 kBAdobe PDFView/Open


Items in repository are protected by copyright, with all rights reserved, unless otherwise indicated.