Influence of Ni-Mn contents on the embrittlement of PWR RPV model steels irradiated to high fluences relevant for LTO beyond 60 years

Understanding the irradiation induced degradation of the reactor pressure vessel (RPV) steels at high fluences becomes more important in view of safe long term operation (LTO) of existing nuclear power plants. Specifically, the role of Ni, Mn and Si and associated synergetic effects on embrittlement be- haviour need to be further investigated to understand accelerated embrittlement at high neutron fluences (ca. 1 ×10 20 n.cm −2 , E > 1 MeV) observed in certain types of RPV steels. In addition, it is required to ver- ify the validity of existing embrittlement trend curves (ETCs) at high fluence values. To address these issues, NRG and JRC performed a unique irradiation experiment called LYRA-10 in the High-Flux Reactor (HFR) Petten. In LYRA-10 a variety of specimens (e.g. tensile, Charpy, mini-Charpy and microscopy) of RPV steels (base metal and welds) with systematic variations in Ni, Mn and Si contents, while keeping the base composition representative of VVER-10 0 0 and PWR RPV steels, have been irradiated for 16 HFR cycles to achieve the nominal fast neutron fluence of 1.11 ×10 20 n.cm −2 at a nominal temperature of 286 °C. A large post-irradiation examination campaign on LYRA-10 specimens has been initiated within the STRUMAT-LTO, which is an international collaboration project co-funded by EURATOM. The research reported in this paper includes results from tensile and mini-Charpy impact testing of four PWR RPV model steel specimens irradiated in LYRA-10, which is performed as part of STRUMAT-LTO in-kind pilot project before the start of the EURATOM co-funded project. The combined influence of Ni and Mn on embrittlement behaviour, characterized by irradiation hardening and shifts in transition temperature (T k ) properties, has been evaluated. The measured shifts in T k values for all four model steels have been com- pared with predicted values from two selected ETCs in order to check their validity for these steels at the above high neutron fluence values.

KOLLURI M.;  TEN PIERICK P.;  BAKKER Theo;  STRAATHOF B.T.;  MAGIELSEN A.J.;  SZARAZ Zoltan;  D'AGATA Elio;  OHMS Carsten;  MARTIN Oliver; 

2021-06-03

ELSEVIER

JRC125471

0022-3115 (online),   

https://www.sciencedirect.com/science/article/pii/S0022311521002592,    https://publications.jrc.ec.europa.eu/repository/handle/JRC125471,   

10.1016/j.jnucmat.2021.153036 (online),