Evaluation of advanced diesel particulate filter concepts for post Euro VI heavy-duty diesel applications

The European Commission (EC) is in the process of finalizing the proposal for the upcoming legislative stage for light- and heavy-duty vehicles. The emission performance over extended operating conditions is under consideration. Furthermore, a tightening of the Solid Particle Number (SPN) limits with a parallel shift of the lowest detectable size from 23 to 10 nm has been suggested. This paper investigates the SPN emission performance of a Euro VI step E HDV and the potential offered by an advanced Diesel Particulate Filter (DPF) to meet the upcoming regulations. Cold start emissions at clean DPF state were found to be as high as 1.3 × 1012 #/kWh, while passive regeneration events could lead to hot start emissions of 3 × 1011 #/kWh. Improvements in the filtration efficiencies at clean state, similar to those offered by the advanced DPF (>99%), will be needed to tackle these operating conditions. The measurements also revealed the formation of 10 nm SPN in the Selective Catalytic Reduction (SCR) system, at a rate of ~1.2 × 1011 #/kWh. These levels lie above the proposed limit of 1011 #/kWh, highlighting the need to also control these non-volatile nanosized particles.

MAMAKOS Athanasios;  ROSE Dominik;  BESCH Marc;  HE Suhao;  GIORIA Roberto;  MELAS Anastasios;  SUAREZ BERTOA Ricardo;  GIECHASKIEL Barouch; 

2022-10-21

MDPI

JRC130502

2073-4433 (online),   

https://www.mdpi.com/2073-4433/13/10/1682,    https://publications.jrc.ec.europa.eu/repository/handle/JRC130502,   

10.3390/atmos13101682 (online),