Please use this identifier to cite or link to this item:
Full metadata record
|dc.identifier.citation||Journal of Nuclear Materials vol. 258-263 p. 1600-1605||en_GB|
|dc.description.abstract||Strain controlled fatigue tests have been performed in torsion at 400 C on type 316L stainless steel samples in both 20% cold worked and annealed conditions during an irradiation with 19 Mev deuterons. A hold time was imposed in the loading cycle. For the (cw) material, at shear strain ranges of 1.13% and 1.3%, irradiation creep induced stress relaxation led to the built up of a mean stress. The fatigue life was significantly reduced in comparison to thermal control tests. For the (ann) material, tested under similar experimental conditions, irradiation creep effects were negligibly small compared to cyclic and irradiation hardening. Thr fatigue life was only slightly reduced. Continuous cycling tests conducted under irradiation conditions lay in the scatter band of the termal control tests. The difference in fatigue life between continuous cycling and hold time tests is attributed mainly to the observed difference in irradiation hardening.||en_GB|
|dc.description.sponsorship||JRC.(IAM)-Institute For Advanced Materials||en_GB|
|dc.title||The Effect of Hold-Times on the Fatigue Behaviour of Type AISI 316L Stainless Steel under Deuteron Irradiation.||en_GB|
|dc.type||Articles in periodicals and books||en_GB|
|JRC Directorate:||Joint Research Centre Historical Collection|
Files in This Item:
There are no files associated with this item.
Items in repository are protected by copyright, with all rights reserved, unless otherwise indicated.