Full metadata record
DC FieldValueLanguage
dc.contributor.authorNOWAK DA COSTA JOANNAen_GB
dc.date.accessioned2011-01-11T08:55:20Z-
dc.date.available2010-12-21en_GB
dc.date.available2011-01-11T08:55:20Z-
dc.date.created2010-12-17en_GB
dc.date.issued2010en_GB
dc.date.submitted2010-12-10en_GB
dc.identifier.isbn978-92-79-18932-6en_GB
dc.identifier.issn1831-9424en_GB
dc.identifier.otherEUR 24666 ENen_GB
dc.identifier.otherOPOCE LB-NA-24666-EN-Nen_GB
dc.identifier.urihttp://publications.jrc.ec.europa.eu/repository/handle/JRC62388-
dc.description.abstractThis report presents the geometric quality results recorded for the two samples of the DMC2 orthorectified products (processing level 1T) acquired over the JRC Maussane Test Site. It was shown that the average 1-D RMSE for the DMC2 L1T ortho product are 22m and 21m of Easting and Northing direction respectively (i.e. about 1 pixel accuracy), or 25m and 24m if point identification error is included. These values are valid if orthorectified SPOT5 Sumermode is used as reference data. These geometric quality results are very promising, however, it should be borne in mind that the tested DMC2 samples are very limited (i.e. two samples). Further testing is required, especially for diverse terrains and images characterised by high satellite inclination angle.en_GB
dc.description.sponsorshipJRC.DG.G.3-Monitoring agricultural resourcesen_GB
dc.format.mediumOnlineen_GB
dc.languageENGen_GB
dc.publisherPublications Office of the European Unionen_GB
dc.relation.ispartofseriesJRC62388en_GB
dc.titleDMCII Geometric Quality Testing for CAP Control with Remote Sensing Programme - Initial Findingsen_GB
dc.typeEUR - Scientific and Technical Research Reportsen_GB
dc.identifier.doi10.2788/86958en_GB
JRC Directorate:Space, Security and Migration

Files in This Item:
File Description SizeFormat 
lbna24666enn.pdf1.09 MBAdobe PDFView/Open


Items in repository are protected by copyright, with all rights reserved, unless otherwise indicated.