Full metadata record
DC FieldValueLanguage
dc.contributor.authorMARTIRE Salvatoreen_GB
dc.contributor.authorCASTELLANI Valentinaen_GB
dc.contributor.authorSALA SERENELLAen_GB
dc.date.accessioned2014-12-16T01:09:37Z-
dc.date.available2014-12-15en_GB
dc.date.available2014-12-16T01:09:37Z-
dc.date.created2014-12-11en_GB
dc.date.issued2015en_GB
dc.date.submitted2013-01-28en_GB
dc.identifier.citationRESOURCES CONSERVATION AND RECYCLING vol. 94 p. 11-20en_GB
dc.identifier.issn0921-3449en_GB
dc.identifier.urihttp://www.sciencedirect.com/science/article/pii/S0921344914002341en_GB
dc.identifier.urihttp://publications.jrc.ec.europa.eu/repository/handle/JRC79477-
dc.description.abstractWood fuels are recognized as a crucial energy source whose sustainable use should be ensured. To ensuresustainability, the calculation of the annual available biomass is one of the bases of forest management.The novelty of our study stem from an extended evaluation of the carrying capacity for taking into accountdifferent site-specific – as well condition-specific – aspects usually neglected. In the case of natural mixedforests, local management plans define the criteria to be adopted in the land management identify themain functions of the forest plots. However, for ensure sustainable forest management, ecological andtechnical local constraints should be assessed in details in order to quantify wood potentially available. Asa standardized procedure for this comprehensive wood availability is missing, the present study proposea GIS-based decision support system (DSS) and methodology for calculating the biomass availabilitywhile supporting the local resource planning. In particular, we focus on the environmental sustainabilityof bio-energy production. In fact, applying the DSS, it is possible to calculate three indicators: operationalcarrying capacity (OCC), chip potential (CP) and technical potential (TP). Those indicators are related,respectively, to the availability of wood from forests according to local plans criteria, the potential of woodchips production, and the comparison of total available biomass with current uses. The DDS considersthe actual uses of the resource, supporting local planners in properly assess the forestry sector and itspossible developments. Two case studies on alpine mountain areas are presented and discussed in lightof contributing to face the challenge of energy planning at local scale. The DDS allow calculating thenumber of chip fueled boilers which could be installed in the areas, using local resource below theircarrying capacity. DSS application helps highlighting some challenges in resource planning and use atlocal scale.en_GB
dc.description.sponsorshipJRC.H.8-Sustainability Assessmenten_GB
dc.format.mediumPrinteden_GB
dc.languageENGen_GB
dc.publisherELSEVIER SCIENCE BVen_GB
dc.relation.ispartofseriesJRC79477en_GB
dc.titleCarrying capacity assessment of forest resources: enhancing environmental sustainability in energy production at local scaleen_GB
dc.typeArticles in periodicals and booksen_GB
dc.identifier.doi10.1016/j.resconrec.2014.11.002en_GB
JRC Directorate:Sustainable Resources

Files in This Item:
There are no files associated with this item.


Items in repository are protected by copyright, with all rights reserved, unless otherwise indicated.