Full metadata record
DC FieldValueLanguage
dc.contributor.authorSCHORCHT Fraukeen_GB
dc.contributor.authorKOURTI Ioannaen_GB
dc.contributor.authorSCALET Bianca Mariaen_GB
dc.contributor.authorROUDIER Sergeen_GB
dc.contributor.authorDELGADO SANCHO Luisen_GB
dc.date.accessioned2013-11-07T01:01:38Z-
dc.date.available2013-11-06en_GB
dc.date.available2013-11-07T01:01:38Z-
dc.date.created2013-10-17en_GB
dc.date.issued2013en_GB
dc.date.submitted2013-07-18en_GB
dc.identifier.isbn978-92-79-32944-9en_GB
dc.identifier.issn1831-9424en_GB
dc.identifier.otherEUR 26129en_GB
dc.identifier.otherOPOCE LB-NA-26-129-EN-Nen_GB
dc.identifier.urihttp://eippcb.jrc.ec.europa.eu/reference/BREF/CLM_Published_def.pdfen_GB
dc.identifier.urihttp://publications.jrc.ec.europa.eu/repository/handle/JRC83006-
dc.description.abstractThe BREF entitled ‘Production of Cement, Lime and Magnesium Oxide’ forms part of a series presenting the results of an exchange of information between EU Member States, the industries concerned, non-governmental organisations promoting environmental protection and the Commission, to draw up, review, and where necessary, update BAT reference documents as required by Article 13(1) of the Directive. This document is published by the European Commission pursuant to Article 13(6) of the Directive. This BREF for the production of cement, lime and magnesium oxide covers the following specified in Annex I to Directive 2010/75/EU, namely: • 3.1. Production of cement, lime and magnesium oxide: (a) production of cement clinker in rotary kilns with a production capacity exceeding 500 tonnes per day or in other kilns with a production capacity exceeding 50 tonnes per day; (b) production of lime in kilns with a production capacity exceeding 50 tonnes per day; (c) production of magnesium oxide in kilns with a production capacity exceeding 50 tonnes per day. The document also covers some activities that may be directly associated to these activities on the same site. Important issues for the implementation of Directive 2010/75/EU in the production of cement, lime and magnesium oxide are the reduction of emissions to air; efficient energy and raw material usage; minimisation, recovery and the recycling of process residues; as well as effective environmental and energy management systems. The BREF document contains 4 main chapters: Chapter 1 – Cement Industry, Chapter 2 – Lime Industry and Chapter 3 – Magnesium Oxide Industry (dry process route based on mined natural magnesite). Sections 1 and 2 of Chapters 1 – 3 provide general information on the industrial sector concerned and on the industrial processes and techniques used within this sector. Sections 3 of Chapters 1 – 3 provide data and information concerning the environmental performance of installations within the sector. Sections 4 of Chapters 1 – 3 describe the techniques to prevent or, where this is not practicable, to reduce the environmental impact of installations in this sector that were considered in determining the BAT. Sections 5 of Chapters 1 – 3 present information on 'emerging techniques' as defined in Article 3(14) of the Directive. Chapter 4 presents the BAT conclusions as defined in Article 3(12) of the Directive.en_GB
dc.description.sponsorshipJRC.J.5-Sustainable Production and Consumptionen_GB
dc.format.mediumOnlineen_GB
dc.languageENGen_GB
dc.publisherPublications Office of the European Unionen_GB
dc.relation.ispartofseriesJRC83006en_GB
dc.titleBest Available Techniques (BAT) Reference Document for the Production of Cement, Lime and Magnesium Oxide: Industrial Emissions Directive 2010/75/EU:(Integrated Pollution Prevention and Control)en_GB
dc.typeJRC Reference Reportsen_GB
dc.identifier.doi10.2788/12850en_GB
JRC Directorate:Growth and Innovation

Files in This Item:
File Description SizeFormat 
clm_published_def.pdf14.06 MBAdobe PDFView/Open


Items in repository are protected by copyright, with all rights reserved, unless otherwise indicated.