Title: Tree height quantification using very high resolution imagery acquired from an unmanned aerial vehicle (UAV) and automatic 3D photo reconstruction methods
Citation: EUROPEAN JOURNAL OF AGRONOMY vol. 55 p. 89-99
Publication Year: 2014
JRC N°: JRC85114
ISSN: 1161-0301
URI: http://dx.doi.org/10.1016/j.eja.2014.01.004
DOI: 10.1016/j.eja.2014.01.004
Type: Articles in periodicals and books
Abstract: This study provides insight into the assessment of canopy biophysical parameter retrieval using passive sensors and specifically into the quantification of tree height in a discontinuous canopy using a low cost camera on board an unmanned aerial vehicle (UAV). The UAV was a 2-m wingspan fixed wing platform with 5.8 kg take-off weight and 63 km/h ground speed. It carried a consumer-grade RGB camera modified for color-infrared detection (CIR) and synchronized with a GPS unit. In this study, the configuration of the electric UAV carrying the camera payload enabled the acquisition of 158 ha in one single flight. The camera system made it possible to acquire very high resolution (VHR) imagery (5 cm pixels) to generate ortho-mosaics and digital surface models (DSMs) through automatic 3D reconstruction methods. The UAV followed pre-designed flight plans over each study site to ensure the acquisition of the imagery with large across- and along-track overlaps (i.e. >80%) using a grid of parallel and perpendicular flight lines. The validation method consisted of taking field measurements of the height of a total of 152 trees in two different study areas using a GPS in RTK mode. The results of the validation assessment conducted to estimate tree height from the VHR DSMs yielded r2=0.83, an overall root mean square error (RMSE) of 35 cm and a relative root mean square error (R RMSE) of 11.5% for trees with heights ranging between 1.16 and 4.38 m. An assessment conducted on the effects of the spatial resolution of the input images acquired by the UAV on the photo-reconstruction method and DSM generation demonstrated stable relationships for pixel resolutions between 5 and 30 cm that rapidly degraded for input images with pixel resolutions lower than 35 cm. RMSE and R-RMSE values obtained as a function of input pixel resolution showed errors in tree quantification below 15% when 30 cm resolution imagery was used to generate the DSMs. The study conducted in two orchards with this UAV system and the photo-reconstruction method highlights that an inexpensive approach based on consumer-grade cameras on board a hand launched unmanned aerial platform can provide accuracies comparable to those of the expensive and computationally more complex LIDAR systems currently operated for agricultural and environmental applications.
JRC Directorate:Sustainable Resources

Files in This Item:
There are no files associated with this item.

Items in repository are protected by copyright, with all rights reserved, unless otherwise indicated.