Title: Corrigendum to “CFD analysis of fast filling strategies for hydrogen tanks and their effects on key-parameters” [Int J Hydrogen Energy 40 (2015) 735-745]
Authors: MELIDEO DANIELEBARALDI Daniele
Citation: INTERNATIONAL JOURNAL OF HYDROGEN ENERGY vol. 40 no. 5 p. 2430-2431
Publisher: PERGAMON-ELSEVIER SCIENCE LTD
Publication Year: 2015
JRC N°: JRC94801
ISSN: 0360-3199
URI: http://www.sciencedirect.com/science/article/pii/S0360319914034582
http://publications.jrc.ec.europa.eu/repository/handle/JRC94801
DOI: 10.1016/j.ijhydene.2014.12.061
Type: Articles in periodicals and books
Abstract: The authors regret that there were some inaccuracies in the above article. In Table 2, the values of the total mass and SOC (i.e., 5th and 6th column, respectively) related to the cases 3D, 4A and 4D were incorrect. The corrected table 2 appears below. The values of the SOC for cases 3D, 4A and 4D were illustrated in figure 9. The corrected figure 9 appears below. The only inaccuracy in the text was related to the SOC of the case 3D that is mentioned twice in the “Final remarks” paragraph. Modifying only the number that is related to the SOC of the case 3D (from 89% to 93 %), the corrected text is: “For the maximum temperature, the range goes from 55 ○C to 85 ○C, for the theoretical cooling demand from 346 kJ to 882 kJ, and for the SOC from 93% to 98%. The maximum cooling energy saving occurs in case 3D where the required energy is 60% less compared to the case 1D, although the maximum temperature is 83 ○C and the SOC is 93% and both values are at the edge of the acceptable ranges.” It must be emphasised that the analysis and conclusions in the paper are not affected by the above inaccuracies.
JRC Directorate:Energy, Transport and Climate

Files in This Item:
There are no files associated with this item.


Items in repository are protected by copyright, with all rights reserved, unless otherwise indicated.